Process For Jetty Pile Protection Painting Against Corrosion Of Seawater

Jetty Pile protection painting against corrosion of seawater is one of the most important solutions to protect marine structures today. In this article, we’ll learn about seawater anti-corrosion paints and their composition and advantages. Firstly, let’s learn about the definition of the anti-corrosion method.

> Read more: Overview of sludge treatment and disposal: Things you need to know

Why does Jetty Pile Protection Against Corrosion Of Seawater Be Important?

Sea water contains very high salt and acid, which greatly affects the work of jetty piles on the sea. The biggest harm is the corrosion of the surface of the building materials. This can even be the cause of serious harm such as chemical leakage that is dangerous to the marine environment and human health.

Therefore, it is very necessary to take Jetty Pile Protection and anti-corrosion paint was born as a solution to limit the impact of seawater on building surfaces. This is not the only solution but is said to be the most effective solution with high durability and cost savings.

Reading case study in Queenland (Australia) to get useful information: https://www.denso.net/seashield-steelcoat-protection-for-jetty-piles/

The Effectiveness Of Jetty Pile Protection Painting Against Corrosion Of Seawater

Besides the main effect is to protect and prevent seawater from affecting the surface of the building, it is also a metal coating for kinds of rigs.  Anti-corrosion paint is also known for the following advantages:

- Helps protect and prolong the life of construction materials at sea.

- Resistant to the rigors of marine conditions and weather.

- Withstands strong impact due to high load and friction.

- Resistant to rust and oxidation of metals.

- Good surface waterproofing for work in wet environments.

- Prevent the growth of mold, and algae on the surface of the building.

- Increase the beauty of the project.

- High adhesion.

- Environmentally friendly, and safe for users.

Process For Jetty Pile Protection Painting Against Corrosion Of Seawater

Every process needs to be taken step by step. You need to apply the correct implementation process to bring the highest efficiency when using anti-corrosion paint ( sơn chống ăn mòn ) . Here are 3 basic construction steps for applying this protective material process.

1. Ensure the surface preparation of things that need to apply the anti-corrosion paint

The first thing you have to do is a clean surface preparation to ensure the process will take a high effect. Clean the surface to be protected. Remove plaque and stains on materials before application to ensure high adhesion and promote the most effective anti-corrosion ability. Moreover, it helps the workers easily apply the paint smoothly and perfectly. 

2. Mix Paint For Jetty Pile Protection According To The Ratio According To The Manufacturer's Instructions 

Embrace the manufacturer’s instructions to ensure that the specifications and quality of the paint are met. The ratio is very important to estimate whether a certain formula is correct or not. Therefore, it is necessary to follow the formula, it can be increased or decreased depending on the feeling of the worker (for skilled workers), but if you are not skilled or do not understand this type of paint, you should follow the instructions. It should not be diluted too thin or too thick will seriously affect the effect of paint and paint durability will not last for long.

3. Apply paint for the Jetty Pile Protection according to the manufacturer's instructions 

Applying paint by using specialized tools for the Jetty Pile Protection, for example, a paint sprays gun to spray directly on the hull of a boat, ship, steel and concrete surfaces. Anti-corrosion paint provides excellent protection for the surface of marine structures. However, you should also note that the construction of this type of paint requires highly specialized skills. Because the paint layer must cover every corner of the surface of the work, make sure that no gaps of the work are left that will affect the quality and life of the product.