Introduction to anti-corrosion Jetty Pile Wrapping for metal structures

 New generation anti-corrosion Jetty Pile Wrapping with microcrystalline wax composition is easy to apply, suitable for most types of structures with a service life of up to 20 years.

Jetty Pile Wrapping - Description, application and preeminent features of metal anti-corrosion cuff

Metallic anti-corrosion cuffs with many typical applications and outstanding features. Here is the basic information about this type of protection- Jetty Pile Wrapping:

Jetty Pile Wrapping - Introduction to microcrystalline wax metal anti-corrosion cuff

Before learning about this type of anti-corrosion bandage (Jetty Pile Wrapping), let's learn about their main component, which is microcrystalline wax. Microcrystalline wax, also known as Micro Wax, is produced from the refining process of mineral oil. To make this wax, people use refining methods such as distillation, deodorization, crystallization, de-oiling, etc. The finished product is opaque white or colorless and in solid form. The properties of microcrystalline waxes will vary depending on the source material and the refining method. Microcrystalline wax is produced in 2 types, laminated type and hard-rolled type.

In addition to the microcrystalline wax anti-corrosion metal cuffs, there are other ingredients such as plasticizers, corrosion inhibitors, solvents and other ingredients. All are saturated to create a non-woven synthetic fabric, without silica mineral fillers, that can be used in different environmental conditions such as on the ground, in the ground, underwater,... This type of wrapping tape is flexible, soft, easy to apply, flexible, can be used with all types of structural shapes, forming an effective and long-lasting protective layer of metal surfaces.

Jetty Pile Wrapping - Some applications of metal anti-corrosion cuffs

The following are typical applications of anti-corrosion cuffs (Jetty Pile Wrapping) for industrial buildings:

• Protect bolts, flanges, pipes, valves, pumps,... of construction equipment.

• Anti-corrosion for steel structure base, tank base, wharf foot, drilling rig,...

• Used for pipe supports, pipes located above ground, underground pipes,...

• Can be used for irregular steel structures or places with complex structures that are difficult to construct.

Jetty Pile Wrapping - Outstanding features of microcrystalline wax metal anti-corrosion bandages

Because of the following outstanding features (Jetty Pile Wrapping0, microcrystalline anti-corrosion cuffs are widely used in many fields:

• Outstanding corrosion resistance.

• Simple and easy construction.

• Simple equipment requirements.

• Easy application with complex structures.

• Compatible with a wide range of materials.

• UV resistance, salt resistance, acid resistance and other organic substances.

• Can be applied on wet substrates.

• Safe for the environment and user health.

Jetty Pile Wrapping - Instructions for the construction of metal anti-corrosion bandages

Following are the basic steps to apply microcrystalline wax component anti-corrosion bandage (Jetty Pile Wrapping):

• Step 1: Clean the surface to be prepared by using sandpaper, iron brush, rags, ... to remove dirt, rust, peeling old paint,...

• Step 2: Apply primer to metal surface to remove rust, peeling layer left on the surface. This liner also functions to provide better adhesion of the anti-corrosion cuff.

• Step 3: Perform tape wrapping on the surface of the part as soon as the lining is finished. In the process of wrapping, use your hands to press and mold the bandage to cover the material, making sure that there are no air bubbles inside. Also, smooth out the edges to make sure they're completely sealed.

Metallic anti-corrosion bandages with microcrystalline wax composition possess outstanding advantages over conventional bandages. In addition, this type of bandage is easy to use and does not require complicated preparation.